Rocktron Xpression User Manual Download

Page: 72 / 76

Check out some of our other products:

Rack Gear

Gainiac (preamp w/12ax7 tube) Chameleon 2000 (preamp w/multi-effects)

Voodu Valve (preamp w/12ax7 tube and multi-effects)

Prophesy (our top of the line preamp with multi-effects)

Blue Thunder (bass preamp w/multi-effects) HUSH Super C (guitar noise silencing system)

Vendetta VP4 Preamp (All Tube 4-Channel Guitar preamp - 2 Rack Space)

Stomp Boxes/Pedal:

Rampage Distortion, Metal Planet Distortion, Silver Dragon Tube Distortion, Deep Blue Chorus,

Tsunami Chorus, Austin Gold Overdrive, Sonic Glory Overdrive, Big Crush Compressor, Short

Timer Digital Delay, X-Tune Pedal Tuner, Banshee Talk Box, HUSH The Pedal, Surf Tremolo,

Black Cat Moan Wah, HEX Volume/Expression Pedal

Electri cGuitar - Acoustic Guitar and Bass Amplifiers:

Vendetta Head(100 W Head 4-Channels All Tube - MIDI Switchable)

Vendetta Combo (100W 2x12 Combo - Celestion 90s all Tube -4-Channel - MIDI Switchable)

R80DSP (80W 1x12 Amp w/Digital Effects) RT80 (80W 1x12 Amp w/Reverb & Built-in Tuner)

R120DSP (120W 2x10 Amp w/Digital Effects) R120C (120W 2x12 Amp w/Stereo Chorus and Reverb)

RT122C (120W 2x12 Amp w/Stereo Chorus, Reverb & Chromatic Tuner)

R50DSP (50 Watt 2x8"Guitar Amp w/Digital Effects)

R50C (50 Watt 2x8"Guitar Amp w/Reverb & Chorus)

R20 (20 Watt 1x8"Amp w/Reverb) R10 (10 Watt 1x6.5")

ACOUSTIC (60 Watt Acoustic Amp with Chorus & Reverb)

RA50DSP (50W Acoustic Amp w/Digital Effects - Wedge Shape)

RA30DSP (30W Acoustic Amp w/Digital Effects - Wedge Shape)

RB20 (Bass Amp 20W with 8" Speaker) RB30 (Basss Amp 30W with 10" Speaker)

RB60 (Bass Amp 60W with 12" Speaker) RB100 (Basss Amp 100W with 15" Speaker)

Foot Controllers

MIDI Mate (Midi Foot Controller) MIDI XChange (MIDI Footcontroller)

All Access (Midi Foot Controller RMM900(7-pin Din MIDI Cable)

RFS1 and RFS2 (Single and Double Latching Footswitches for Rampage Amps)

Summary of Contents for Xpression













































































Search results

Summary of Contents for Xpression

Reviews:

Related manuals for Xpression

Brands by name

Popular brands

Rocktron Xpression, User Manual

Search results

Summary of Contents for Xpression

Reviews:

Related manuals for Xpression

Brands by name

Popular brands