3
PRODUCT SPECIFIC SAFETY WARNINGS
> When working with epoxy, make sure the area is
well-ventilated, wear nitrile gloves and use an applicator.
Avoid contact with skin or clothing.
> Excessive heat buildup during drilling could lead to
cracking of the blank sections. To minimize heat buildup,
drill about 1/4"-1/2" at a time, regularly backing out the bit
to clear the chips. Also, stop 1/8" short of the end of the
blank sections to prevent blowout.
> Do NOT use cyanoacrylate (CA) glue. As it cures, it will
leave an unsightly residue on the inside of the Tubes and
the dial of the Hygrometer.
