RocketFish RF-HTN104, User Manual

Page: 44 / 73

44
L2TP (Layer 2 Tunneling Protocol)
Select the L2TP radio button if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This is typically used for DSL connections.
User Name: Enter the L2TP user name provided by your ISP.
Password: Enter the password provided by your ISP. Enter it again in the Retype
Password field.
L2TP Server:
Enter the L2TP Server IP Address provided by your server.
Local IP Address:
If you have a static IP address issued by your ISP, you can
specify that it be used here. Ensure that you check the box labeled Use the
following local IP address.
DNS Servers: Enter the primary and secondary DNS Servers provided by your ISP.
Ensure that you check the box labeled Use the following DNS server addresses .
MTU: The Maximum Transmission Unit. You may need to modify this according to
your ISP. The default setting is 1400.
Maximum Idle Time: Enter the maximum time in minutes that the internet
connection should be maintained when there is no network activity. Enter 0 to
always keep the connection active.
Dial-up mode: Use the radio button to select a reconnect mode. You may choose from:
Auto : reconnect when disconnection detected.
Manual : the user must come back to this screen and click to connect again.
On Demand : the router will detect when a request is made for an internet resource and initiate the connection.