19
Air Spring Service
Remove the outer and inner o-rings on the floating seal head. Apply grease
and install new o-rings.
Remove the air piston outer o-ring. Apply grease and install a new o-ring.
Remove the top out bumper cone from the air piston. Inspect the tension
pin hole on the air piston. Install the top out bumper cone onto the air
piston.
NOTICE
If the tension pin is protruding or not centered, replace the air piston
assembly and inspect the inside of the upper tube for damage.
Apply a liberal amount of grease to the inside of the upper tube, from the
end of the tube to approximately 60 mm into the tube.
8
Pick
Pick
SRAM Butter (Bluto™ or Reba®) / PM600 (Reba only)
9
10
11
SRAM Butter (Bluto™ or Reba®) / PM600 (Reba only)
