11
Lower Leg Removal
Strike the wrench to dislodge the shaft from the lower leg on each side.
Remove each bottom bolt.
Firmly pull the lower leg downward until oil begins to drain. Continue
pulling downward to remove the lower leg.
If the lower leg does not slide off of the upper tube or if oil does not drain
from either side, the press fit of the shaft(s) into the lower leg may still be
engaged. Reinstall the bottom bolts 2 to 3 turns and repeat the previous
step.
NOTICE
Do not strike the fork arch with any tool when removing the lower leg as
this could damage the lower leg.
50 Hour Service
Continue the 50 Hour Service with
Lower Leg Service
.
200 Hour Service
Continue the 200 Hour Service with
Lower Leg Seal Service
.
Mallet & 5 mm
5 mm
5
6
