Robustel GoRugged R3000-3P User Guide
88
R3000-3P#
R3000-3P# show link-management //show current link-management
*********************************************
wan link : Eth0 Only // now “Eth0 Only” as wan-link
ICMP primary server : 8.8.8.8
ICMP second server : 8.8.8.4
ICMP detection interval : 30 seconds
ICMP detection timeout : 3 seconds
ICMP detection retries : 3
reset the interface : no
*********************************************
R3000-3P# configure
R3000-3P(config)# set eth0
ethernet interface type:WAN
type select:
1. Static IP
2. DHCP
3. PPP0E
->please select mode(1-3)[1]:
->IP address[192.168.0.1]:58.1.1.1 //set IP address for eth0
->Netmask[255.255.255.0]:255.0.0.0
->gateway[192.168.0.254]:58.1.1.254 //set gateway for eth0
->mtu value(1024-1500)[1500]:
->input primary DNS[192.168.0.254]:58.1.1.254 //set dns for eth0
->input secondary DNS[0.0.0.0]:
this parameter will be take effect when reboot!
really want to modify[yes]:
R3000-3P(config)# end
R3000-3P# write //save current configuration
Building configuration...
OK
R3000-3P# reload
!Reboot the system ?'yes'or 'no':yes //reload to take effect
Example 5: CLI for Cellular dialup
R3000-3P> enable
Password: *****
R3000-3P#
R3000-3P# show link-management
