Robustel GoRugged R3000-3P User Guide
55
3.23
Configuration -> PPTP
This section allows users to set the PPTP parameters.
PPTP Client @ PPTP
Item
Description
Default
Add
Enable
Enable PPTP Client. The max tunnel accounts are 3.
Null
Disable
Disable PPTP Client.
Null
Remote IP Address
Enter your PPTP server’s public IP or domain name.
Null
Username
Enter the username which was provided by your PPTP server.
Null
Password
Enter the password which was provided by your PPTP server.
Null
Authentication
Select from “Auto”, “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
You need to select the corresponding authentication method based on the
server’s authentication method. When you select “Auto”, router will auto
select the correct method based on server’s method.
Auto
Remote Subnet
Enter PPTP remote Protected subnet’s address.
Null
Remote Subnet Mask
Enter PPTP remote Protected subnet’s mask.
Null
Enable MPPE
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a protocol for
encrypting data across PPP and VPN links.
Disable
Show Advanced
Tick to enable the PPTP client advanced setting.
Disable
Local IP
Set the IP address of the PPTP client.
You can enter the IP which assigned by PPTP server. Null means PPTP client
will obtain an IP address automatically from PPTP server’s IP pool.
Null
Remote IP
Enter the remote peer’s private IP address or remote subnet’s gateways
address.
Null
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Protocol
Field
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Asyncmap Value
One of the PPTP initialization strings. In general, you don’t need to modify
this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of packet,
which is possible to receive in a given environment.
1500
MTU
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
1436
Link Detection Interval
Specify the interval between PPTP client and server.
To check the connectivity of a tunnel, the client and server regularly send PPP
Echo to each other. If the client or server receives no response from the peer
30
