Robustel GoRugged R3000-3P User Guide
42
dynamically, the IKE negotiation mode must be aggressive. In this case,
SAs can be established as long as the username and password are
correct.
Encryption Algorithm
Select from “DES”, “3DES”, “AES128”, “AES192” and “AES256”to be
used in IKE negotiation.
DES: Uses the DES algorithm in CBC mode and 56-bit key.
3DES: Uses the 3DES algorithm in CBC mode and 168-bit key.
AES128: Uses the AES algorithm in CBC mode and 128-bit key.
AES192: Uses the AES algorithm in CBC mode and 192-bit key.
AES256: Uses the AES algorithm in CBC mode and 256-bit key.
3DES
Authentication
Algorithm
Select from “MD5” and “SHA1”to be used in IKE negotiation.
MD5: Uses HMAC-SHA1.
SHA1: Uses HMAC-MD5.
MD5
DH Group
Select from “MODP768_1”, “MODP1024_2” and “MODP1536_5”to be
used in key negotiation phase 1.
MODP768_1: Uses the 768-bit Diffie-Hellman group.
MODP1024_2: Uses the 1024-bit Diffie-Hellman group.
MODP1536_5: Uses the 1536-bit Diffie-Hellman group.
MODP1024_2
Authentication
Select from “PSK”, “CA”, “XAUTH Init PSK” and “XAUTH Init CA” to be
used in IKE negotiation.
PSK: Pre-shared Key.
CA: Certification Authority.
XAUTH: Extended Authentication to AAA server.
PSK
Secrets
Enter the Pre-shared Key.
Null
Life Time @ IKE
Parameter
Set the lifetime in IKE negotiation.
Before an SA expires, IKE negotiates a new SA. As soon as the new SA is
set up, it takes effect immediately and the old one will be cleared
automatically when it expires.
86400
SA Algorithm
Select from “DES_MD5_96”, “DES_SHA1_96”, “3DES_MD5_96”, “3DES_
SHA1_96”, “AES128_MD5_96”, “AES128_ SHA1_96”,
“AES192_MD5_96”, “AES192_ SHA1_96”, “AES256_MD5_96” and
“AES256_ SHA1_96” when you select “ESP” in “Protocol”;
Select from “AH_MD5_96” and “AH_ SHA1_96” when you select “AH”
in “Protocol”;
Note
:
Higher security means more complex implementation and lower
speed. DES is enough to meet general requirements. Use 3DES when
high confidentiality and security are required.
3DES_MD5_96
PFS Group
Select from “PFS_NULL”, “MODP768_1”, “MODP1024_2” and
“MODP1536_5”.
PFS_NULL: Disable PFS Group
MODP768_1: Uses the 768-bit Diffie-Hellman group.
MODP1024_2: Uses the 1024-bit Diffie-Hellman group.
MODP1536_5: Uses the 1536-bit Diffie-Hellman group.
PFS_NULL
Life Time @ SA
Set the IPSec SA lifetime.
28800
