Linea Calorio – Radiatori individuali a gas – Libretto d’installazione, uso e manutenzione
24
Figure 8
– Positioning of the template and drilling for models 41, 42, 51 and 52
7.
Locate the supporting bracket and the air pipe Ø 49, making sure that the pipe edge
perfectly enters the matching hole in the supporting frame (see Figure 8).
8.
Fix the supporting bracket with the screws and place the adhesive seal around the
air inlet pipe hole (see Figure 8).
9.
Locate the auto adhesive seal in sponge material on the support frame (place it on
the back of the unit) as indicated in Figure 9. Try to avoid re positioning which could
bring difficulties.
10. Match the extreme part of the exhaust pipe (Ø 35 mm) on the unit stub pipe(Figure
10).
11. Install the gas convector to the wall leaning edge C present on the inferior edge of
the frame to the supporting bracket, as indicated in Figure 11.
Guarnizione
autoadesiva
Figure 9 –
Seal positioning
staffa di sostegno
tubo aria
guarnizione adesiva
A
A
Summary of Contents for Calorio Series
Page 2: ......
Page 15: ...Linea Calorio Radiatori individuali a gas Libretto d installazione uso e manutenzione 14...
Page 29: ...Linea Calorio Radiatori individuali a gas Libretto d installazione uso e manutenzione 28...
Page 41: ...Linea Calorio Radiatori individuali a gas Libretto d installazione uso e manutenzione 40...
