Robur Calorio Series, Installation, Use And Maintenance Manual

Page: 14 / 44

Sezione utente
13
F
B
E
C
D
H
G
A
C
D
B
A reset key
B
temperature regulation knob
C
red light indicating unit shutdown
D
green light indicating working of the unit
E
ma
nual/programmed key
F
programmed timer
G
min/max output key
A
B
C
D
E
F
SECTION 2 END USER SECTION
In this section you will find all information necessary to let Calorio gas convectors
functioning in a correct way.
The functioning of Calorio gas convectors is leaded by the ambient thermostat equipped
with all models and, in models 42 and 52, by the programmable timer.
2.1 HOW TO START AND TURN OFF THE GAS CONVECTOR
)
The first start up of the unit must be carried out by qualified service engineer.
Before turning the unit on the
qualified service engineer
must check:
•
That the values shown on the unit plate are exactly the same as the ones of the
electric and gas supply.
•
The unit adjustment actually responds to the unit operating capacity.
•
The proper working of air inlet and fume exhaust flue system (in accordance with
the existing regulations).
CALORIO 52 CALORIO 51/41 CALORIO 42
H
summer/winter and reset key
Figure 2
– Control panel