R302V Operation Manual
14
G. Cucumbers coming out with torn skins and/or with
seeds knocked out
1. Blade is dull on plate and must be changed.
NOTE:
Cucumber condition before process
ing should be considered.
H. Carrots are watery after grating
1. Grating grid surface is dull and should be re
placed.
I. Cheese forms balls instead of shreds
1. Warm cheese
2. The grating grid is dull and should be replaced
J. Machine becomes jammed while processing
1. Turn unit OFF, and unplug machine. Remove
continuous feed lead and remove remnants
of product being processed.
Put on a pair
of cut-resistant gloves
and try and turn plate
manually in a counterclockwise direction.
CAUTION: This may be very hard to do. As
soon as you feel the plate slip, you will be
able to reassemble the unit and continue pro
cessing. If unit jams again, repeat above until
you get the plate to slip. Now, remove and
clean the plate. Before reassembling make
sure:
a. Motor shaft is clean.
b. Plate is fully seated on motor
shaft.
2. If jamming is too tight to loosen by hand, contact
service agency.
CAUTION:
It is advisable to keep the machine un-
plugged while cleaning or servicing.
VI.
SERVICE INFORMATION /
SERVICE AGENCY LIST
Your Robot Coupe has a one year limited warranty
against defects in parts and workmanship. Should
the unit require service, check with your distributor
to see where local service is available. If not or if
you wish your unit to be serviced at the factory, call
for a return merchandise authorization (RMA) num-
ber, and upon receipt of same, ship it PREPAID and
insured to our factory address.
USA, Inc. Service Dept.
Phone: 1-800-824-1646
601-898-8411
