027
Environmental protection description
The chemical substances contained in the built-in lithium-ion ba
tt
ery of this product can cause environmental pollution.
Before disposing of this product, remove the ba
tt
ery. The ba
tt
ery should then be properly recycled either through local authorities or
by providing the ba
tt
eries to a ba
tt
ery recycling facility.
How to remove the ba
tt
ery:
1. Turn o
ff
the robot.
2. Unscrew the ba
tt
ery cover.
3. Remove the ba
tt
ery cover.
4. Press the clip to pull out the ba
tt
ery connector.
5. Remove the ba
tt
ery.
Note:
Before removing the ba
tt
ery, make sure it is fully drained. Do not a
tt
empt to remove the ba
tt
ery if the robot is connected to the charging dock.
Remove the entire ba
tt
ery pack. Avoid damaging the ba
tt
ery pack casing to avoid short-circuits or leakage of hazardous substances.
In the event of accidental contact with ba
tt
ery fluid, rinse thoroughly with water and seek immediate medical care.
Note:
The following information applies only when disposing of the robot or if the ba
tt
ery is no longer funvctioning normally. You will be able to recognize this problem if, even when
le
ft
to charge, the robot cannot clean due to a low ba
tt
ery. Do not remove the ba
tt
ery if you intend to continue using the robot.
