- 62 -
B
Rotoplat DW 108 - 508
Rotoplat DW-C 108 - 508
14C214042
English
Chapter 6
ABOUT THE USE
6.15. SWITCHING THE MACHINE ON AND OFF
Proceed as indicated.
1. Turn main switch
(A)
on
I
(ON)
to turn on electric power supply.
Display reads
“RES”
2. Press the “Reset” button
(B)
; the
display will enter stand-by mode
3. Set the cycle parameters (see
6.16. “Cycle parameter setting”).
4. Perform the cycle start operations
(see 6.19. “Starting and stopping
the cycle”).
5. Turn the main switch
(A)
to
0
(OFF) to turn the machine off
6.16. CYCLE PARAMETER SETTING
Proceed as indicated
‒ Switch the machine on
(see 6.15. “Switching the machine on and
off”).
‒ Choose the recipe number.
‒ Press the button relative to the parameter to be modified to view
the current value.
The LED on button switches on.
‒ Press the
+/-
buttons to increase or decrease the value, until the
desired one is obtained (See “Programming window”).
This new value will be stored in the relative program.
