Roboguard
36
Select an input zone on your receiver (this can be a Keypad, HQ or a
uRx/L – one zone only) by following the instructions in the manual.
Note:
Intruder zones on the receiver will only accept Roboguard Code
and Remote zones on the receiver will only accept Remote Code.
Now Trigger the device connected to the uTx to allow it to send a signal
to the receiver and register itself in the zone.
Continue with the next device.
Ensure all your devices are in their passive state and turn Switch 2
OFF.
Leave Switch 3 ON if you are transmitting Remote Code.
Turn Switch 4 ON and then OFF. This will register the default state for
each device.
The LED will now flash to allow you to see what default settings have
been selected for the inputs.
Zone: 1 2 3 4
1 flash
N/C
N/C
N/C
N/C
2 ”
N/O
N/C
N/C
N/C
3 ”
N/C
N/O
N/C
N/C
4 ”
N/O
N/O
N/C
N/C
5 ”
N/C
N/C
N/O
N/C
6 ”
N/O
N/C
N/O
N/C
7 ”
N/C
N/O
N/O
N/C
8 ”
N/O
N/O
N/O
N/C
9 ”
N/C
N/C
N/C
N/O
10 ”
N/O
N/C
N/C
N/O
11 ”
N/C
N/O
N/C
N/O
12 ”
N/O
N/O
N/C
N/O
13 ”
N/C
N/C
N/O
N/O
14 ”
N/O
N/C
N/O
N/O
15 ”
N/C
N/O
N/O
N/O
16 ”
N/O
N/O
N/O
N/O
Summary of Contents for TRX005
