Roboguard
34
UNIVERSAL TRANSMITTER - uTx
1.
The uTx can be wired to a receiver and
configured to be a
Repeater Station
for increased radio distance.
2.
The Universal Transmitter (uTx) has
four zone inputs that can be wired to
any device, such as an Electric Fence,
indoor passive, panic button, reed
switch etc. This will allow these devices
to communicate with any Roboguard
receiver. The uTx can mimic either
Roboguards
or
(not both) Remote
Transmitter functions; these unique
codes can be programmed into an HQ,
Keypad or a Universal Receiver
(Roboguard receiver/decoder panels).
3.
The input zone sends an intruder signal as soon as the input state is
changed (N/C to N/O or vice versa) and will stop sending the
supervisory Auto Test signal if it remains in the altered state;
thereby monitoring functionality of the devices wired to it. (Auto
test signals apply to Roboguard Code only)
Switch 1 - ON
(Default). In this mode the unit will function as a
repeater station.
Switch 2, 3, and 4
will implement the following delay time between
receiving and transmitting a signal.
Delay
Switch 2
Switch 3
Switch 4
2.4 SEC
OFF
OFF
OFF
2.8 SEC
OFF
OFF
ON
2.8 SEC
OFF
ON
OFF
4 SEC
OFF
ON
ON
4.8 SEC
ON
OFF
OFF
5 SEC
ON
ON
OFF
6.5 SEC
ON
ON
ON
Summary of Contents for TRX005
