Z500-serie
V0818
9
English
Deutsch
Mounting the sliding table
(Fig.4)
To obtain a good arrangement and function of the sliding table; it is vital that the machine is put on a
right level in both directions, with the help of a level, before putting the sliding table on the machine.
All the adjustments and arrangements are done in the factory. Simply put the table onto the frame
with the two lateral adjustment bolts (1) into the two lugs of the frame. Be sure that the girder rests
well in the height adjustment bolts. Now place the 4 big Allen bolts (3) and tighten well. In order to
obtain a good movement of the wood or the sliding table, the sliding table is set near to 2 mm above
the sawing table. The parallelism between the principal blade and the sliding table, can be corrected
by using 2 bolts. After the adjustment, the 4 bolts need to be tightened well with a Torque wrench
with a value of 7 kg (70 Nm). The adjustment in height of the sliding table can be done by using 8
bolts (2) but always with the big bolts closed.
Fig.3
Fig.4
Fig.6
