Z500-serie
V0818
15
English
Deutsch
After confirming your choise of the saw blade, you
will be asked an extra control of the R.P.M.
The machine shows the current R.P.M., you must
confirm this is the right speed for this saw blade.
3.1.2 SETTING THE GROOVE CUTTER
This procedure is the same as for changing the saw blade. The differences are:
The table insert has to be taken away in order to mount the groove cutter tool.
The maximum dimensions of this tool is 16 mm wide and a body thickness of 12 mm.
1 groove cutter can be stored the same way as a
saw blade.
Once the groove cutter selected, the whole saw unit
can only be moved up-and down. It is impossible to
groove at an angle.
The high lighted symbol indicates which value you change,
in this case the saw blade diameter
Min. and max. value
of the saw blade
Numeric field
Return
Confirm
Screen saw blade settings
