background image

 

 

Warranty Certificate (New Zealand)

 

Terms and Conditions 

The following conditions apply in respect of the warranty given in this certificate: 
 

1. 

Robinhood Limited (“Robinhood”) warrants the following products against manufacturing defects and faulty materials, 
under normal use and subject to the exclusions in this certificate, for a period of: 
under normal use and subject to the exclusions in this certificate, for a period of: 

Rangehood 

– 24 months from date of original purchase for domestic use. 

Uniduct 

– 12 months from date of original purchase for domestic use. 

Ironing centre 

– 12 months from date of original purchase for domestic use. 

“Original purchase”, when used in this certificate, means purchase by the customer directly from Robinhood Limited or 
one of its approved suppliers. 

2. 

This warranty is limited to the repair or replacement, at Robinhood’s option, within the warranty period of any 

component part which Robinhood at its discretion determines to contain faulty materials or a manufacturing defect in 
breach of this warranty. This warranty is subject to terms and conditions set out in this certificate. 

3. 

The warranty only applies within New Zealand. 

4. 

The customer must produce the original invoice or other purchase documentation as proof of the original purchase 

date. 
 

Warranty exclusions 

1.  

The warranty does not apply where, in the opinion of Robinhood: 
The defect is caused by misuse, wear and tear, dirt, fire or accidental damage. 
The product has been repaired or serviced by an unauthorised person. 
The product was not installed in accordance with Robinhood instructions. 
The product was purchased overseas or was not designed for use in New Zealand. 
The product was not used, cleaned or cared for in accordance with Robinhood’s instructions. 
The product was used outdoors. 

2.  

In addition, this warranty does not extend to damage or defects which in Robinhood’s opinion, directly or indirectly 
arise from or are due to: 
Exposing the product to acidic or corrosive materials or chemicals such as dyes, solvents, denture cleaner or acetone; 
Using inappropriate household cleaning products such as abrasive cream or powder cleansers, furniture polish, bleach, 
mentholated spirits, drain cleaners, sugar soap, metal pads and strongly alkaline or acidic cleaners; 
Heat damage, including from washing the product at high temperatures; 
Impact or mishandling the product, including the impact caused by objects scraped along, thrown or dropped on the 
product surface or excessive weight being placed on the product; 
Structural or support changes in or affecting the building or the application where the product has been installed; 
Failure to clean or maintain the product as recommended; or 
any other causes specified in the product information as being excluded from this warranty. 

3.  

Variations with the colour or gloss within the product or any ageing or fading of colour, shine or gloss level over time 
are not covered by this warranty. The warranty does not cover visual imperfections or blemishes in the surface and 
edges of the product that were not brought to your supplier’s attention at the time you inspected the product. 

4.  

Costs incurred on installation or removal of a product, or any reinstallation of a product, or any associated costs, are 
not covered by this warranty. 

5.  

Robinhood will not be liable for consequential or indirect loss or damage whatsoever and however arising out of or in 
connection with the supply, performance or removal of the product, including (but not limited to) loss of profit, loss of 
revenue, loss of contract, lost of goodwill or increased cost of workings, even if due to the negligence of Robinhood or 
any of its approved suppliers, employees or agents. 

6.  

Charcoal filters and light bulbs are not covered by this warranty 

7.  

This warranty and the statements contained in this certificate or other Robinhood documents given to you do not 
exclude, restrict or modify the application of any term implied into this warranty by statute, provided that (to the 
extent any statutory provision permits Robinhood to limit its liability for a breach of an implied condition or warranty) 
Robinhood’s liability for such breach is limited to the payment of the cost of replacing the product, repairing the 
product or acquiring an equivalent product. 

8.  

Subject to clause 5, the obligations of Robinhood under this warranty are limited to those set out in this certificate, 
and this warranty is expressly instead of all other warranties, express or implied, including any implied warranty of 
merchantability or fitness for a particular purpose and notwithstanding any course of dealing between the parties or 
custom and usage in trade to the contrary. 
 
 

Should warranty service be required, please contact Robinhood: 
 
Free Phone: 0800 760 667 
Free Fax: 0800 276 246 
Email: [email protected] 
Website: www.robinhood.co.nz 
 
 
 
 
 
 
Terms and conditions are subject to change without notice

 

 

 

 

 

Summary of Contents for RCB2AH6SS











Reviews: