3
Pre-Installation
- continued
Ducting Options
The method of ducting should be carefully considered before installing the rangehood. The guide below
recommends the ducting components to use for all common ducting configurations - through the top of the home
(for the roof and soffit) and through the rear of the home. 150mm round ducting or 285 x 85mm rectangular
ducting can be used in conjunction with this model rangehood. Alternatively this rangehood can be operated in
recirculation mode (see Recirculation mode pg 6).
The highlighted area in the table below gives the recommended Uniduct item numbers for different
mounting and outlet options.
Duct mounting option
Rear
Top (roof)
Top (soffit/eave)
Uniduct item numbers
150mm
diameter round outlet
1566
1634 and
1635
1634 and
1688
D
u
c
t
o
u
tl
e
t
o
p
ti
o
n
285mm x 85mm
Rectangular outlet
1575
1570 and
1571
1570 and
1596(x2) and
1600
Extra lengths and/or bends may be required, depending on the length required and whether there is any
structural material in the run e.g. rafters.
Please note that this chart is designed as a guide. Please consult Robinhood customer services if unsure.
For NZ phone 0800 760 667 or www.robinhood.co.nz. For AUS phone 1800 648 556 or www.robinhood.com.au.
