7
Remote control battery replacement
1. Use a tool such as a coin to remove the battery cover on the rear of your remote control. Rotate
the cover approximately 45 degrees in an anti-clockwise direction to align the dot on the cover
with the 'OPEN' marking on the remote control. Gently tap the control to release the cover.
2. Insert 1 x CR2025 size battery into the compartment with the positive side () facing
towards the battery cover, as shown on the reverse side of the battery cover.
3. Close the battery cover by re-applying the cover to the control in the position marked "Open"
and then use a tool such as a coin to rotate the cover clockwise so that there is a slight click and
the dot on the cover is aligned with the "Lock" marking on the remote control.
4. If the remote is not to be used for an extended period of time it is recommended that the battery
is removed.
IMPORTANT:
7KHEDWWHU\VKRXOGQRWEHH[SRVHGWRH[FHVVLYHKHDWVXFKDVIURPGLUHFWVXQVKLQH¿UH
or the like. After use, disposable batteries should if possible be taken to a suitable recycling centre.
On no account should batteries be disposed of by incineration.
Do not leave batteries within reach of young children. They can be a choking hazard.
Lock
Open
Coin slot
WARNING:
•
Do not ingest the battery. Chemical Burn hazard.
•
The remote control supplied with this product contains a coin/button cell battery. If the coin/button
cell battery is swallowed it can cause severe internal burns in just 2 hours and can be fatal.
•
Keep new and used batteries away from children.
•
If the battery compartment does not close securely, stop using the product and keep it away from
children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
CAUTION
Replace battery only with the same or equivalent type. Danger of explosion if the battery is incorrectly
replaced.
