&RQ¿JXUDWLRQ
12
&RQQHFWLQJWR\RXUFRPSXWHUQHWZRUNFRQW
There are two indicator lights incorporated into the RJ-45 connector. If you have
problems with your wired connection, they may help you to identify the possible
cause of the problem.
Green ON = Link established; OFF = no connection
Yellow Flashing = Data transfer
,I\RXUQHWZRUNGRHVQRWVXSSRUWDXWRPDWLFFRQ¿JXUDWLRQRULI\RXZLVKWRVHWLWXS
manually then you should select
>0DQXDOFRQ¿J@
instead of selecting
'[Wired]'
in the
Network Wizard, then go to page 16.
,I\RXSODQWRXVHD:L)LFRQQHFWLRQ\RXZLOO¿UVWQHHGWRLGHQWLI\\RXUQHWZRUNLQWKH
list of network names presented by the Network Wizard. If no networks are found
then you may have to get your wireless router working (please see the instructions
supplied with it) or you may be too far from the router.
:KHQWKHUDGLR¿QGV\RXUZLUHOHVVQHWZRUNLWGLVSOD\VWKH1HWZRUN1DPH66,'
for the wireless access point on the screen. This is a name that is allocated to the
access point in your router by the person who set up the network - for example:
'Jones
family'
or
'Paul's network'
. Routers supplied by Internet Service Providers often have
the default name of the WiFi network provided on a label or card for easy reference
(e.g. BTHub - 1234, virginmedia 1234567). If the router supports WiFi Protected
Setup, then
'[WPS]'
will be shown in front of the SSID.
,WLVSRVVLEOHDQGLQVRPHORFDWLRQVKLJKO\OLNHO\WKDW\RXUUDGLRZLOO¿QGPRUHWKDQ
one wireless network, in which case you should choose which one you need to
connect to.
4. Rotate
Tuning
to see the SSID for each wireless network that has been found. If
your network is shown proceed to step 6 on the next page. If it is
not
shown then
proceed to step 5, also on the next page.
If you make a mistake at any point, use the
Back
button to go back to the previous
screen.
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Network settings
Network wizard
Scanning...
