11
&RQQHFWLQJWR\RXUFRPSXWHUQHWZRUN
Before you can use your Stream 94i radio to listen to Internet radio or to music streamed from your computer, it
PXVW¿UVWEHFRQQHFWHGWR\RXUFRPSXWHUQHWZRUN
This section of this book describes how to connect the radio to your network using either the wireless (WiFi)
connection or the wired (Ethernet) connection.
The following instructions assume that you have just set up the clock and time options using the Setup Wizard
as described on the preceding page.
These instructions also apply to the Network Wizard in the Network Settings menu (from step 2 onwards).
1. After setting the Daylight Savings options (see page 10), the display will show the 'Keep network connected?'
option. You should choose
'Yes'
if you wish to keep the radio connected to the network when it is in Standby
mode. This will allow remote control software to switch on your radio when needed.
If
you
choose
'No'
then your radio will shut down its WiFi connection when it is in Standby, DAB, FM, Bluetooth
or Aux-in modes. This minimises power consumption but it does mean that you will need to switch the radio on
manually in order to use either Spotify Connect, the 'Play to / Cast to Device' function or any remote control
software such as the UNDOK app.
Rotate
Tuning
to highlight the required option and then press the control to make the selection.
After setting the Keep Connected option, the display will show a list of supported WiFi regional options.
Rotate
Tuning
to highlight the required region (for the UK choose
'Europe'
), and then press the control to
make the selection. Do this even if you are planning to use the wired Ethernet connection. Your radio will
then scan for available WiFi networks.
2. The radio will enter the Network Settings Wizard and will display
'Scanning...'
. The radio will automatically
scan both 2.4GHz and 5GHz WiFi bands. After a short while the display will show a list of the available WiFi
networks. If you are intending to use the WiFi connection, go to step 3 on the next page.
7RXVHWKH(WKHUQHWFRQQHFWLRQWR\RXUURXWHUZLWKDXWRPDWLFFRQ¿JXUDWLRQURWDWH
Tuning
to point to the
'[Wired]'
menu item. Press the control and the radio will attempt to connect.
,I\RXUQHWZRUNDOORZVDXWRPDWLFFRQ¿JXUDWLRQZKLFKLVQRUPDOWKHUDGLRZLOODFTXLUHDQHWZRUNDGGUHVV7KH
screen should say
'Connecting...'
, and then
'Setup wizard completed'
. Press
Tuning
to exit the setup wizard
and show the Main mode menu. You can then skip to paragraph 10 on page 14.
[WPS]Smith
Jones
Paul’s network
[Rescan]
[Wired]
[Manual config]
SSID
Waiting for
Ethernet
Please wait
Network settings
Network wizard
Scanning...
Wlan region
Europe
*
Network settings
Keep network connected?
