FM Radio
Operating your sound system in FM mode
1. Carefully extend the telescopic aerial and press the
On/Off
button to
switch on your sound system.
2. Press
the
Mode
button as needed to select FM Radio mode.
3. Rotate
the
Tuning/Select
control
in a clockwise direction. The displayed
frequency will increase. Press the
Tuning/Select
control to
carry out
an auto-tune. Your radio will scan up the FM band from the currently
displayed frequency and will stop scanning when it
fi
nds a station of
suf
fi
cient strength.
4. The display will show the frequency of the signal which has been
found. If RDS information is available, after a few seconds the display
will show the radio station name.
If you only hear hiss or interference, simply press the
Tuning/Select
control to scan further. Your sound system may have found a spurious
interference signal.
5. To
fi
nd more FM stations press the
Tuning/Select
control to
repeat the
scan operation. To scan down in frequency, rotate the
Tuning/Select
control
in a anti-clockwise direction
fi
rst and then press the control.
Your radio will scan down the FM band from the currently displayed
frequency and will stop scanning when it
fi
nds a signal of suf
fi
cient
strength.
6. When the end of the waveband is reached your sound system will
recommence tuning from the opposite end of the waveband.
7. Use
the
Volume
control to adjust the sound level as needed.
69
3-5
2
1
7
Summary of Contents for STREAM 83I
Page 104: ...Notes 101 ...