3
Battery operation using alkaline batteries
(also see page 31)
1. Remove the battery cover on the back of the unit by pushing the catch down
and lifting the cover off.
2. Slide the switch inside the battery compartment to the
Alkaline
position.
3. Insert four LR6 (AA size) alkaline batteries into the spaces in the compartment.
Take care to ensure all batteries are inserted with the correct polarity as
shown on the battery compartment cover. Then replace the battery cover.
• Important: when using alkaline batteries the battery switch must be
placed in the alkaline position. Failure to do so could result in serious
damage to the batteries or radio.
4. The low battery indicator
showing on the display, reduced power,
distortion and a ‘stuttering’ sound are all signs that the batteries may need
replacing. When the batteries have full charge the full battery indicator
will be shown on the display.
5. The alarm clock function may be used when the radio is powered from
batteries (see page 23).
• If the radio is not to be used for any extended period of time it is recom-
mended that the batteries are removed from the radio.
•
We would recommend for economy that the Blutune T2 is used via the AC
adaptor whenever possible with battery operation for occasional or stand-by
use only. If extended listening using batteries is anticipated, then the use of
rechargeable batteries is recommended, see page 4.
IMPORTANT:
The batteries should not be exposed to excessive heat
such as sunshine, fire or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.
Caution:
Replace batteries only with the same or equivalent type. Danger
of explosion if the batteries are incorrectly replaced.
NiMH
On
Off
Alkaline
CHARGE
Aux In
1
