robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.
VALID SINCE
: 09.05.01
DocT
ech1039_1439_090501.ind
20
TECHNICAL FILE
2500W HMI FOLLOW SPOT
DATA
IN
DATA
OUT
By - pass
Booster
NETWORK USE
DIGITAL
(DMX - AVAB)
DATA OUT OPTION (ON THE LIGHTING UNIT).
To install the DATA line, daisy chain all units.
You can not make a star configuration. In this case - use a specific DATA splitter.
- The DATA goes to the connector DATA IN on the
CAD 900 ( a ) .
- The signal is present on the DATA output of the
lighting unit.
- When the lighting unit is in use, there are two
possiblities for the output - DATA OUT :
1 : Booster on - The signal passes by an amp.
2 : Booster off - The signal passes on direct on
the output.
( Refer to User's manual CAD 900 - page 11 ).
- When the lighting unit is not in use ( power supply
off ), the DATA is still present on DATA output.
etc.
OUT
IN
Output
Dimmer
OUT
IN
Output
Dimmer
a b
d
c
a b
d
c
CONNECTIONS
2 - LINK USE.
1 - PRINCIPLE.
1039B & 1439B
Summary of Contents for 1039
Page 2: ...NOTES ...
