Robe DigitalSpot 5000 DT User Manual Download

Page: 34 / 111

DigitalSpot 5000 DT

a dark pixel, the result will be dark.

Minimum mode (80-97 DMX):

This mode takes the pixel that is the darkest between the current layer and

the layer underneath

Maximum mode (100-117 DMX)

: This mode takes the pixel that is the brightest between the current layer and

the layer underneath.

The playback options:

DMX value

Playback options

Meaning

Play forward continuously if dimmer >0 Plays the video segment from In Frame point to

Out Frame point, continuous looping. The dimmer

value has to be greater than 0.

Play forward once if dimmer >0

Plays the video segment from In Frame point to

Out Frame point and holds on the last frame.

The dimmer value has to be greater than 0.

Pause

Stops playback of video file at the current playing

Play forward in continuous loop

Plays the video segment from In frame point to Out

Frame point, looping continuously

frame

Play forward once

Plays the video segment from In Frame point to Out

Frame point and holds on the last frame

Scrub (display) the selected In Frame Displays the frame which has been defined by

the In Frame value.

Scrub (display) the selected Out Frame Displays the frame which has been defined by

the Out Frame value.

19. Playback speed

The

Playback speed

channel controls the speed of video playback at selected playback options.

DMX value

Playback speed

Meaning

0 or 128

Normal speed

Plays back video files at the original record. speed

1-127

Slow speeds from slowest to normal

Plays back video files at an increasing speed,

from the slowest to the original recorded speed

129-255

Faster than normal to fastest

Plays back video files at an increasing speed,

from faster than normal to the fastest.

Summary of Contents for DigitalSpot 5000 DT
















































































































Search results

Summary of Contents for DigitalSpot 5000 DT

Reviews:

Related manuals for DigitalSpot 5000 DT

Brands by name

Popular brands

Robe DigitalSpot 5000 DT, User Manual

Search results

Summary of Contents for DigitalSpot 5000 DT

Reviews:

Related manuals for DigitalSpot 5000 DT

Brands by name

Popular brands