DigitalSpot 5000 DT
23
Synchro Verbose Mode
--- used for debugging of video synchronization.
Default Settings
--- Select this option to set default values or to remove user´s content in the fixture.
Set Default Values
--- Select this option to reset all fixture personalities to the default values.
Remove User Media Content
--- The item deletes all user media contents except the factory media
content.
15.4 Lamp On/Off
Use this option in order to switch on/off the projector´s lamp.Do not use the projector continuously for 24 hours or
more. If using the projector continuously for long periods, turn it off and leave it for one hour at least once during a
24 hour period.
15.5 Manual control
Manual DMX control ---
Select this menu to control all channels by the control elements on the control board.
Video Input Selection ---
This menu enables to select desired video input:
Internal input
External VGA Input
External SVIDEO Input
Data projector control ---
Select this menu to operate the on-screen menu of the projector by means of the control
elements placed on the fixture control board.
The [RNS] encoder wheel controls movement between arrow fields on the control display and the [ENTER] button
enables movement in menu.Pressing the [ENTER] on a circular field (with "OK") confirms selected options.
The [ESC] button-leaves menu without saving changes.
15.6 Stand-alone setting
Use this menu to set options for a stand-alone mode as a selection of the playing program, programming and
modifying current programs.
Play program
--- Select this menu to run a built-in program or 10 freely-programmable programs
in a loop.
