Robe DigitalSpot 3000 DT User Manual Download Page 80

Page: 80 / 113

DigitalSpot 3000 DT

31.3 Replacing the air filters

Important! Check the air filters periodically and clean before they become clogged!

Clean the air filters with a vacuum cleaner or you can wash them and put back dry.

Replacing air filters in the fixture head.

1) Disconnect the fixture from power.

2) Raise up a filter cover (1) (fixed by two magnets) on the head cover

3) Pull the air filter (2) out.

4) Clean or replace the air filter.

5) Snap the filter cover back to the head cover.

6) Reset item "Time To Cleanup Filters" in the "Service menu".

Replacing the air filter in the fixture base.

1) Disconnect the fixture from power.

2) Remove a side cover (2) by loosening the 4 quarter-turn fasteners (1).

3) Pull the air filter (3) out.

4) Clean or replace the air filter .

5) Put the side cover back.

6) Reset item "Time To Cleanup Filters" in the "Service menu".

Summary of Contents for DigitalSpot 3000 DT


















































































































Search results

Summary of Contents for DigitalSpot 3000 DT

Reviews:

Related manuals for DigitalSpot 3000 DT

Brands by name

Popular brands

Robe DigitalSpot 3000 DT, User Manual

Search results

Summary of Contents for DigitalSpot 3000 DT

Reviews:

Related manuals for DigitalSpot 3000 DT

Brands by name

Popular brands