DigitalSpot 3000 DT
58
The mirrored image configurations bring 2 advantages:
1.
Resolution of the source image and merged images on the wall is the same in comparison with
non-mirrored configuration (if you use suitable mirrored configuration – see example 3 below).
2.
By using the picture merging with mirrored configuration you can cover any size of projection area.
The base matrix of fixtures can be repeated. The total number of used projectors is unlimited.
Examples:
4 DigitalSpots 7000DT are used in the picture merging.
Source picture
Aspect ratio: 4:3
Resolution: 1024 x 768
Images on the wall:
Example 1.
Horizontally mirrored configuration 4 x 1 (DMX=129) set on all fixtures
All projected images have a resolution of 1024 x 768, but the resolution of 1024 pixels is “made ” from 512 pixels
as each fixture projects 1/2 of the source picture (this half has a source resolution 512 x 768).
Example 2.
Horizontally mirrored configuration 2 x 1 (DMX=128) set on two pairs of fixtures
2 x 1
2 x 1
All projected images have a resolution of 1024 x 768 pixels and the total image does not have any distortion
(horizontally or vertically). The base matrix 2 x 1 is twice repeated.
Example 3.
Non- mirrored configuration 4 x 1 (DMX=9) set on all fixtures
All projected images have resolution 1024 x 768, but the resolution of 1024 pixels is “made ” from 256 pixels as
each fixture projects ¼ of the source picture (this quarter has a source resolution 256 x 768).
Summary of Contents for DigitalSpot 3000 DT
Page 1: ...Version 1 7 ...
