CitySkape Xtreme (RGBW)
18
1.
Use the UP/DOWN buttons to find “
St.AL.
“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select desired program.
4.
Press the ENTER button. The selected program runs in a loop.
Edit --- Editing a program
. The fixture offers 3 freely editable programs (EPG.1-EPG.3) each up to 68
steps. Every
program step includes a fade time-the time taken by the step´s channel status to reach the desired level and a
step time-the total time occupied by the step in the program.
E.g. If “F.tim.“=5 second and “S.tim.“=20 second, effects will go to the desired position during 5 seconds and after
that they will stay in this position for 15 seconds before going to the next prog. step
1.
1. Use the UP/DOWN buttons to find “
St.AL.
“ menu and press the ENTER button.
2.
Use the UP/DOWN buttons to select “Edit“ menu and press the ENTER button.
3.
Use the UP/DOWN buttons to select a program you want to edit (PrG.1-PrG.3 and press ENTER button.
4.
Use the UP/DOWN buttons to select a desired program step ("St.01" - "St.68") and press ENTER button.
5.
Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“P.End” -
a total number of the program steps (value 1-68). This value should be set before start
Programming (e.g. if you want to create program with 10 steps, set P.End=10).
“
rEd1” -
“
rEd2”
– a
red LEDs saturation(0-255), module 1-2
“GrE1“ - “GrE2“ –a green LEDs saturation (0-255) ), module 1-2
“bLu1“ - “bLu2“ – a blue LEDs saturation (0-255) ), module 1-2
“Whi1“ - “Whi2“ – a white LEDs saturation (0-255) ), module 1-2
“MACr“ - colour macros (0-255), both modules
“Stro.“ - a strobe, shutter (0-255), both modules
“dimr“ - a dimmer (0-255), both modules
“F.tim.“ - a fade time, (0-25.5) seconds
“S.tim.“ - step time, value (0-25.5) seconds
“COPY“. – this item duplicates the current prog. step to the next prog. step. The item “P.End” is increased
automatically.
6.
Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
7.
Use the UP/DOWN buttons to select next channel and press the ENTER button.
8.
After having set all channels in the current program step, press the MODE button to go by one menu level
back and select another program step.
6.7 Special functions
rdML
---
Code
.This menu item shows the first part of the RDM identification code.
rdMH
---
Code
. This menu item shows the second part of the RDM identification code.
AdJ
---
Effect Adjustment.
The menu allows calibration of each LEDs array.
dMH
---
DMX Values.
The menu item enables to control all LEDs before calibrating each LEDs array.
CAL.U
---
Calibrating unit.
The menu serves for fine current calibration of LEDs during fixture burn-in at
a factory. Each LED array can be calibrated separately. Users should not change the setting.
rAdI
---
Wireless DMX.
The menu serves for reading of the wireless operation status (only for wireless DMX
version).
r.InF.
---
Wireless DMX information.
The menu item shows level of received signal in %. If the fixture is not
linked to the transmitter, “
no.LI
” is displayed.
r.UnL.
---
Wireless DMX unlink.
The item serves for unlinking the fixture from transmitter.
Summary of Contents for CitySkape Xtreme
Page 1: ...Version 2 2 ...
