Robe CitySkape Xtreme, User Manual, Page: 6 / 24

CitySkape Xtreme (RGBW)
6
Both LED modules can be adjusted to the desired position either together by means of the the tilt-locks for both
LED modules or individually. For individual adjusting of the LED module you do not need any tool as a friction
locks keep adjusted position of each LED module.
Danger of injury! Two workers have to handle with the fixture including adjusting the LED modules to
the desired position. The LED modules are very heavy.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack
these qualifications, do not attempt the installation yourself, but instead use a professional structural rigger.
Improper installation can result in bodily injury or damage to property.
For overhead use, always install a safety rope that can hold at least 10 times the weight of the fixture. You must
only use safety rope with screw-on carbine. Pull the safety rope through the apertures in the fixture base and over
the trussing system.
Caution: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety of a
possible installation, do not install the device.
3.2 Connection to the mains
Fixtures must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulation.
Install a suitable plug on the power cord, note that the cores in the power cord are colored according to the
following table.
Core (Eu) Core (US) Connection Plug Terminal Marking
Brown Black Live L
Light blue White Neutral N
Yellow/Green Green Earth
This device falls under class one and must be grounded!