STOP / ENTER BUTTON
• A current operation, e.g. CHARGE, can be terminated by pressing the STOP button.
• The ENTER button confirms a selection, e.g. activation or deactivation of a selected
menu.
DATA VIEW BUTTON
• Shows the charger data, e.g. input voltage. Pressing this but-
ton also shows all individual cell voltages of a connected LiPo battery pack
.
All buttons have an Autorepeat function so that the respective function is repeated-
ly switched when the button is held pressed.
INTEGRATED SOUND GENERATOR
• The piezo buzzer confirms each time a button is pressed and acoustically signals the end
of charging/discharging as well as any faults.
4.
TEchNIcAL SPEcIfIcATION
Operating voltage:
12 V DC (car battery)
(
(Do not connect to a car battery charger!)
Cell count:
1 ... 14 cells NC/NiMH,
1 ... 6 cells LiIo (3.6 V), LiPo (3.7 V), LiFe (3.3 V)
1 ... 6 cells (2...12 V) lead-acid battery
Charging current:
0.1 ... 5 A at max. 50 W
Discharging current:
0.1 ... 1 A at max. 5 W
Equalizing current:
max. 250mA
Charging power:
50 W, current is controlled to suit
e.g. 24 V battery voltage, charging current approx. 2.0 A
e.g. 28 V battery voltage, charging current approx. 1.7 A
Discharging power:
5 W, current is controlled to suit
Trickle charge:
Charged capacity <1 Ah: No trickle charge
Charged capacity >1 Ah: Trickle charge at C/20
(only with NC and NiMH)
Cut-off voltage:
0.8 V per cell for NC and NiMH,
3.0 V per cell for LiPo, Lilo
2.5 V per cell for LiFe
1.8 V per cell for lead batteries
1,8V pro Zelle bei Bleiakkus
Charge Cut-Off:
NC/NiMH:
automatic, digital Delta-Peak system
Lead and lithium:
automatic, voltage-dependent, CC-CV method
Dimensions:
est. 225 x 170 x 40 mm
Functions:
Charge, discharge, discharge-charge, balance
10 internal memory locations
Note:
stated values refer to a single charge ouput port!
Operating Instructions
Power Peak® Quad EQ-BID
Order No.
8565
7
