Positioning
100mm
55mm
200m
m
55mm
55mm
400mm
55m
m
400mm
Clearances required when fitting
without a cooker hood
Clearances required when fitting
with a cooker hood
Cookerhood
4
700mm
700mm
Gas Hob
The adjacent furniture must be able to withstand a minimum temperature rise of 65
above the ambient
℃
temperature of the room it is located in during periods of use.
◆
The edges of the hob must be a minimum distance of 55 mm from a side or rear wall.
◆
700 mm between the highest point of the hob surface (including the burners) and the underside of any
horizontal surface directly above it.
◆
400
,
mm between the hob surfaces providing that the underside of the horizontal surface is in line with the
outer edge of the hob If the underside of the horizontal surface is lower than 400 mm then it must be at least
mm away from the outer edges of the hob.
55
◆
55 mm clearance around the appliance and between the hob surface and any combustible materials.
◆
This appliance can be located in a kitchen.
The appliance must not be installed in a bathroom or shower room.
IMPORTANT:
This appliance is classified as class 3 and therefore is to be built into a kitchen unit(depending on size
or
mm worktop providing the following minimum distances are allowed:
600
,
INSTALLATION INTO THE CABINET
Please take the cut-out size according to the cooktop dimension.
900
JZY B110
-
JZT B110
-
JZY B310
-
JZT B310
-
JZY G311
-
JZT
-
G311
JZY B410
-
JZT B410
-
JZY G411
-
JZT
-
G411
JZY G511
-
JZT
-
G511
JZY B510
-
JZT B510
-
