9
Before first use
YOU SHOULD CLEAN THE HOB SURFACE(SEE CLEANING AND MAINTENANCE SECTION).
"
"
The following symbols will appear on the control panel
,
next to each control knob
:
:
Gas Off
:
Maximum Setting
:
Minimum Setting
Picture2
Picture1
Operation Methods
Picture4
Gas Hob
To ignite a burner
◆
◆
◆
Never select a knob position between the maximum and off position.
◆
.
The symbol on the control panel next to the control knob will indicate which gas burner it operates
Automatic
ignition with flame failure safety device the appliance is fitted with a flame failure safety device on each burner
,
which is designed to stop the flow of gas to the burner head in the event of the flame going out.
The minimum setting is at the end of the anti clockwise rotation of the control knob.
All operation positions must be selected between the maximum and minimum position.
◆
Check if the burner copper cap copper core or other parts are positioned correctly and confirm the knob
button(Picture 1 position then turn on the gas valve.
)
◆
If you keep the control knob depressed the automatic ignition for the burner will operate.
◆
Ignition Press the control button then contrarotate
degree accordingly it s Large flame You should hold
:
90
, '
.
down the control knob for 15 seconds after the flame on the burner has lit If after 15s the burner has not lit,
.
stop operating the device and open the compartment door and wait at least 1 min before attempting a further
ignition of the burner.
◆-
,
After this 15 second interval to regulate the flame you should continue turning the control knob anti clockwise
until the flame is at a suitable level The operating position must be at a position between the maximum position
.
(Picture 3 and minimum position(Picture 4).
)
◆,
To switch the burner off turn the control knob fully clockwise to the gas off position.
◆,
In case of power failure the burners can be lit by carefully using a match.
◆
Extinguish the burner will be extinguished when the knob turn to(Picture1) the position.
:
◆
The use method of hob at low temperature is the same as in normal temperature.
Energy saving tips
Pan Size
Burners
ø
min
ø
max
2 0
6 mm
2 0
8 mm
◆
to that of the burner.
The diametre of the bottom
of the pan should correspond
◆
◆
Use flat bottomed pans only.
◆
When possible
keep a lid on the pan whilst cooking.
◆
Cook vegetables with as little water as possible to reduce cooking times.
Always place pans centrally over the hob burners and position them so that the handles cannot
IMPORTANT
:
get accidentally caught or knocked off You should also make sure that the handle is not over one of the other
.
hob burner flames.
The burner flame must never extend beyond the diametre of the pan.
Picture3
:
Ignition position
S
emi-Rapid
160 mm
2 0
0 mm
Auxiliary
1
mm
20
140 mm
Rapid
220 mm
2 0
4 mm
WOK