2018+ JL WRANGLER FULL
-
WIDTH FRONT
Page ( 2 of 8 )
www.
ROADARMOR
.com
INSTALL INSTRUCTIONS
SAFETY FIRST!
•
FOLLOW ALL INSTRUCTIONS, YOUR SAFETY AND THE SAFETY OF OTHERS IS MOST IMPORTANT.
•
WEAR APPROPRIATE EYE PROTECTION AND EXERCISE CAUTION WHEN DRILLING / CUTTING
REQUIRED TOOLS
INCLUDED HARDWARE
I
WARNING
Read the instructions completely before beginning installation. Before tightening bolts,
drilling or cutting where required, check to make sure there are no obstructions such as
brake, fuel or electrical lines which may be damaged. Also keep in mind this is an after-
market product and MAY require minor shimming and/or trimming, reaming, etc. for
proper fit. Road Armor is not responsible for any damages to vehicle.
IMPORTANT NOTICE
•
Be sure to inspect and test fit your product to ensure proper fitment before having it coated, painted, bed
lined, etc.
•
Road Armor will not be responsible for the cost of coating your unit if any problems with fit or finish are not
noted and addressed beforehand.
Metric and SAE Socket Sets and Wrenches
Torx bits and driver
Tape Measure
Painter Tape
6
1/4"
-
20 x 3/4" ASTM A307 Grade A Zinc Finish
Hex Bolt
8
1.5" Single Bolt Tab (ZINC)
6
1/4" x 0.625" OD Low Carbon Zinc Finish Steel
SAE General Purpose Flat Washer
8
1/2" Yellow Zinc Finish High Alloy Medium Split Lock Washer
6
1/4" Zinc Finish Medium Split Lock Washer
8
1/2" x 1.062" OD Thru
-
Hardened Yellow Zinc Finish Steel SAE
General Purpose Flat Washer
6
1/4"
-
20 Zinc Finish Grade A Finished Hex Nut
8
1/2"
-
13 Yellow Zinc Finish Grade 8 Finished Hex Nut
4
3/8 POLYCARBONATE PUSH PLUG
8
1/4"
-
20 x 3/4" ASTM F879 Hex Drive Grade 18
-
8 Stainless
Steel Button Socket Cap Screw
8
1/2" Bolt 15/16" O.D. Zinc Pushnut Bolt Retainer
8
1/4"
-
20 Zinc Finish Steel with External Tooth Lockwasher K
-
Lock Nut
