2
RND 305-00018
ENGLISH
Introduction
The RND 305-00018 is a 4 Stage switch mode charger with MCU controlled constant current pulse Bulk,
PWM (Pulse Width Modulation) Absorption and PWM Float / Maintenance charge. It is suitable for all types
of 24V all types wet, sealed lead (GEL, AGM) acid, Calcium-Calcium batt ery. It can recondition lightly
sulphated lead acid batt ery. Though it is primarily designed for indoor use, it has a splash proof sealed
Polycarbonate casing.
!Please read this manual carefully and follow the instructions!
Features
1. 4 Stage Charge with constant current pulse Bulk, PWM Absorption & Float.
A.
Check & Qualifying batt ery to Desulphate Pulse Charging.
B.
Constant current pulse Bulk charge
C.
PWM Absorption charge
D.
PWM Float / Maintenance charge.
2. Wet, sealed lead (GEL, AGM) acid, and Calcium-Calcium batt ery type selection.
3. Select and forget operation and can be connected to batt ery for months.
4. Auto recover to last selected Charge Mode on return from AC power blackout.
5. Electronic wrong batt ery connection, short circuit protections
6. Over temperature protection from decrease in output current to shut down.
7. The Microprocessor unit (MCU) controls charging and monitors batt ery state of charge with advanced
PWM charging which makes it faster and saver charge your batt ery without overcharging or
undercharging.
Contents
• Smart Charger with lead connector
• Detachable leads with protection cover & crocodile clips
• Detachable leads with protection cover & ring terminals
