SAFETY INSTRUCTIONS
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
Manual EC 24 · EN05 · 2015-02
7
Start-up:
With the start-up of this device it is to be made sure that all cables in the clamp area are
correctly connected and run.
The case must be completely closed.
With the installation and start-up the standard EN60079-14 is to be observed.
The device may be started up only by persons after training.
Settings:
The basic setting of the device takes place by RMG Messtechnik.
Changes of the basic setting may only be carried out by persons after training and/or
instruction.
Maintenance:
The battery changes may only take place in a safe area.
Repairs at this device may be carried out by RMG Messtechnik only.
Safety instructions:
The manual must be accessible to all persons, who are authorized with the operation of the
device.
No arbitrary changes may be made at the device, since otherwise the [ATEX] approval
becomes invalid.
The device may be never opened by force.
The warning references in this manual and the generally accepted safety rules must be
observed.
