RME Audio M-32 AD Pro User Manual Download Page 32

Page: 32 / 59

1. Connect to the device remotely (

see:

Section 8.5.1, “Finding the Device on a Network”).

Status Indicator

State of Visual Feedback

Front Panel Dark Mode

Global Metering Options

Peak/Over Hold Reset

2. Use the corresponding toggle switches on the web remote to switch off device lighting.

8.4.2. Changing the Meters to Peak or RMS Mode

Depending on the application, instantaneous

peak level metering

or a slower, averaged

RMS metering

can be chosen.



This is a global setting which affects both the front panel level meters and the remote
control interface.

To change the metering mode on the device:

1. Open the

visual feedback

tab in the

STATE

section.

2. Push the encoder on the current "Metering:" value to activate selection.

3. Change the value to "Peak" or "RMS".

To change the metering mode on the web remote:

1. Connect to the device remotely (

see:

Section 8.5.1, “Finding the Device on a Network”).

2. Locate the

visual feedback

tab in the

STATE

section.

RME M-32 AD Pro User’s Guide

8.4. Front Panel Illumination |

Summary of Contents for M-32 AD Pro




























































Search results

Summary of Contents for M-32 AD Pro

Reviews:

Related manuals for M-32 AD Pro

Brands by name

Popular brands

RME Audio M-32 AD Pro, User Manual

Search results

Summary of Contents for M-32 AD Pro

Reviews:

Related manuals for M-32 AD Pro

Brands by name

Popular brands