8. STATE Section
The
STATE
section contains states and settings that are unrelated to audio I/O and clock. It can be
used to configure power supply warnings, presets, dark mode, level meters, and remote control.
A
warning
(red) is shown when PSU redundancy is activated but only one power supply is active. A
notification
(orange) is shown when a preset is modified or dark mode is active.
8.1. Power State
This icon in the
STATE
section informs the user which of the two IEC inlets receive
power. It is a realtime representation of the current power state, with an inactive power
supply shown in grey.
When facing the front panel, the left power plug corresponds to the left IEC inlet at the
rear.
Representation of the power states on the device
1. Open the
power
tab in the
STATE
section
2. The state of each PSU is shown as
active
if it receives power.
Representation of the power state on the web remote
Power tab within State section
Status Indicator
State of power supplies
Section 8.1.1, “Notification of Single Power Failure”
8.1.1. Notification of Single Power Failure
A warning can be displayed when one of two connected power sources fails.
On the display, a warning is signaled as an icon with a red bar:
RME M-32 AD Pro User’s Guide
8. STATE Section |
23
