RME Audio Hammerfall HDSP AES-32 User Manual Download Page 9 | Manualshive

Page: 9 / 80

RME Audio Hammerfall HDSP AES-32 User Manual Download Page 9

User's Guide HDSP AES-32

© RME

9

9. Appendix

RME news, driver updates and further product information are available on our website:

http://www.rme-audio.de

Distributor:
Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 / 91810

Manufacturer:
IMM Elektronik GmbH, Leipziger Strasse 32, D-09648 Mittweida, Germany

Trademarks

All trademarks, registered or otherwise, are the property of their respective owners. RME,
DIGICheck and Hammerfall are registered trademarks of RME Intelligent Audio Solutions.
HDSPe AES, HDSP AES-32, TMS, DIGI96, SyncAlign, ZLM, SyncCheck and TotalMix are
trademarks of RME Intelligent Audio Solutions. Microsoft, Windows 2000, Windows XP, Win-
dows Vista and Windows 7 are registered trademarks or trademarks of Microsoft Corp.
Steinberg, Cubase and VST are registered trademarks of Steinberg Media Technologies
GmbH. ASIO is a trademark of Steinberg Media Technologies GmbH.

Copyright

©

Matthias Carstens, 02/2010. Version 1.2

Current driver version: Windows: 3.083, Mac OS X 2.53. Firmware: 254

Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is
correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide.
Lending or copying any part of the guide or the RME Driver CD, or any commercial exploitation of these media without
express written permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifi-
cations at any time without notice.

«
...
7
8
9
10
11
...
»

Summary of Contents for Hammerfall HDSP AES-32

















































































Reviews:

No comments