User's Guide HDSP AES-32
© RME
25
16. DIGICheck
The DIGICheck software is a unique utility developed for testing, measuring and analysing digi-
tal audio streams. Although this software is fairly self-explanatory, it still includes a comprehen-
sive online help. DIGICheck 5.2 operates as multi-client ASIO host, therefore can be used in
parallel to any software with both inputs and outputs (!). The following is a short summary of the
currently available functions:
•
Level Meter
. High precision 24-bit resolution, 2/8/64 channels. Application examples: Peak
level measurement, RMS level measurement, over-detection, phase correlation measure-
ment, dynamic range and signal-to-noise ratios, RMS to peak difference (loudness), long
term peak measurement, input check. Oversampling mode for levels higher than 0 dBFS.
Vertical and horizontal mode. Slow RMS and RLB weighting filter. Supports visualization ac-
cording to the K-system.
•
Hardware Level Meter
for
Input
,
Playback
and
Output
. As above, received pre-calculated
directly from the HDSP system hardware with near zero CPU load.
•
Spectral Analyser.
World wide unique 10-, 20- or 30-band display in analog bandpass-filter
technology. 192 kHz-capable!
•
Vector Audio Scope
. World wide unique Goniometer showing the typical afterglow of an
oscilloscope-tube. Includes Correlation meter and level meter.
•
Surround Audio Scope.
Professional Surround Level Meter with extended correlation
analysis.
•
Totalyser
. Spectral Analyser, Level Meter and Vector Audio Scope in a single window.
•
Bit Statistics & Noise
. Shows the true resolution of audio signals as well as errors and DC
offset. Includes Signal to Noise measurement in dB and dBA, plus DC measurement.
•
Channel Status Display
. Detailed analysis and display of SPDIF and AES/EBU Channel
Status data.
•
Global Record.
Long-term recording of all channels at lowest system load.
•
Completely multi-client.
Open as many measurement windows as you like, on any chan-
nels and inputs or outputs!
To install DIGICheck, go to the
\DIGICheck
directory on the RME Driver CD and run
setup.exe
.
Follow the instructions prompted on the screen.
DIGICheck is constantly improved. The latest version is always found on our website
www.rme-audio.de
, section
Downloads / DIGICheck
.
Summary of Contents for Hammerfall HDSP AES-32
