To toggle the phase of an input signal
1. Use the button next to the corresponding input to access its settings.
2. On a combined XLR/TRS input, press the
third
button twice in quick succession (double press). The
phase button
Ø
will become yellow.
9.1.7. Gain Groups
The gain level of two or more channels can be linked temporarily or permanently. When part of a group,
gain is increased or decreased as an
offset
(in dB) to the previously set individual gain levels. The offset
is not stored itself - the adjustment is immediately applied to all member channels.
The group gain offset is
not
limited by the minimum/maximum gain of the participating channels. As a
consequence, gain
differences
between channels will be reduced when a positive (negative) offset is
applied while one of the channels has already reached its highest (lowest) gain setting.
In order to create an equal gain for all channels in a group, first set the offset of the group
to its lowest (negative) value. Then, increase the offset to the preferred gain.
Group Overview
Level meters
Add channels to group
Save group
Current offset
Linked gains
Gain indicator
RME AVB Tool User’s Guide
9.1. Analog Inputs |
48
Summary of Contents for AVB Tool
Page 2: ...RME AVB Tool User s Guide...
