2. Ensure that the
HTTP Remote
setting is switched to
ON
.
USB
When the device is connected with a USB 2.0 cable to a Apple macOS™ or Microsoft Windows™
computer, a network device is automatically installed in the background that assigns the AVB Tool the
following IP address:
Only
one
of the following products can be connected to the host computer via USB at a
time: RME M-32 AD Pro, M-32 DA Pro, 12Mic, AVB Tool, M-1610 Pro.
Ethernet
The integrated ethernet adapter will join an IP network when connected. If no DHCP server is found, for
example when connecting the AVB Tool directly to a computer, an address is automatically self-assigned
(in the 169.254.0.0/16 subnet).
To find out the current IP address:
1. Open the
remote
tab in the
STATE
section. To enter the State section press the encoder twice while
in the main screen, then select the remote tab.
2. The current IP address is displayed.
3. Enter the IP address in the address bar.
Connecting to the Remote Interface without IP address
Instead of using the IP address, the
device name
can be entered in the browser window, followed by
.local/
.
By default, the name is avb-tool, and the corresponding URL is therefore:
The length of the custom name should not exceed 63 characters. Spaces in the device
name should be written as hyphens ("-") when entering the URL.
on some operating systems or browsers, a trailing dot "." may be required after the 'local'
domain: http://avb-tool.local./
The device name is stored in a preset. Loading a preset can therefore change the device
name and require a different address.
RME AVB Tool User’s Guide
8.4. Remote Control Overview |
36
Summary of Contents for AVB Tool
Page 2: ...RME AVB Tool User s Guide...
