Copyright © 2013 Ready Made RC, LLC
2
2.
Ensure that all control
surfaces are easily flexible
by gently working them
through the motion.
-
For the wings on PNP
version, you will need to
disconnect servo from horn
to pre-flex.
3.
Prepare control horns for
glue by scoring the surface
with a hobby knife to assist
with adhesion.
-
Also, gently score the foam
cavity to allow glue to seep
in further for more strength.
4.
Pre fit horns into cavities
prior to gluing. You may
need to trim some plastic
flashing in order to fit.
-
Add glue to cavity and press
firmly. It is alright to have a
small amount come back up
around the outside.
5.
Ensure that servos are at 90*
and attach servo horn.
Second servo will need to
have horn on opposite side
for opposing wing.
-
If you do not have a servo
centering tool, use your radio
and receiver.
