RLH Industries, Inc.
936 N. Main Street, Orange, CA 92867
Phone: 800-877-1672
FAX: 714-532-1885
email: [email protected]
www.fiberopticlink.com
Fiber Optic Link
RLH Industries, Inc.
The leader in
rugged, fiber op�c
technology
USER GUIDE
Transmission Method:
Frequency modulated light via a single op�cal fiber
Multimode:
1310nm (62.5/125μm, 50/125μm)
Singlemode:
1310nm (8~9/125μm)
Singlemode Long Haul:
1550nm (8~9/125μm)
Maximum Fiber
Multimode:
8dB / 1.2 miles (2km) +/-2dB
Attenuation/Distance:
Singlemode:
12dB~25dB (20km-120km) +/-2dB
Note: Distances equated using industry standard fiber and connector a�enua�on.
Fiber condi�on, splices, and connectors may affect actual range.
Connector Type:
ST or SC connectors
System Accuracy:
<0.2% @ 25C
Note: Accuracy for Fiber Link System, Both Transmi�er & Receiver
Ambient Temp Effect (0°C to +70°C):
< 0.2%
Ambient Temp Effect (-40°C to 0°C):
< 2.0%
Update Rate:
1.3 Khz
Signal Resolution:
12 Bits
Sensitivity:
2^12 (4096) Steps
Voltage Operating Range:
0~11VDC
Current Operating Range:
0mA~22mA (DC)
Analog Signal:
4~20mA System
Analog Input:
1 Single-ended (unipolar)
Impedance:
250 Ohms
Protection:
+/- 50mA
Analog Output:
1 Single-ended (unipolar)
Loop Voltage:
23.7VDC
Maximum Loop Resistance:
1000 Ohms
Protection:
+/- 32mA
Power Requirements:
24VDC, 4 Wa�s maximum power consump�on per device
Wire Connector:
Screw clamp terminal blocks, 16~26 AWG
DC Input Isolation:
1.5KV
Surge Protection:
PTC thermistors, zener diodes and varistors
Over Current Protection:
0.5A (Automa�c Recovery)
Operating Temperature:
-40°C to +70°C (-40°F to +158°F), 95% non-condensing
Dimensions:
1.2” (W) x 3.91” (D) x 4.93” (H), (31mm x 100mm x 126mm)
*Not including connectors
Warranty:
Limited Life�me
Key Specifications
