49
•
Sensor Settings and Calibration
AirLink 6940XP Operator’s Manual
Sensor Information
The system information screen displays the following information:
• The connection status to the primary controller
• The scale of the sensor element
• The battery voltage of the device
• The calibration number of the sensor, used for diagnostic purposes
• The voltage value (in volts) that the sensor was reading when zeroed
• The current voltage value (in volts) that the sensor element is reading
This screen is for informational purposes only.
1. If necessary, enter the Product Settings and Configuration menu by pressing and holding
MENU
for approximately 6 seconds.
Press and release
ADD
or
SUB
to navigate to the desired sensor settings menu, then press
MENU
to select the menu.
2. Press and release
ADD
until the “Sensor Info” menu item appears. Press
MENU
to select the
“Sensor Info” menu item.
3. Review the information displayed.
4. Press
MENU
or
BACK
to return to the Sensor Settings menu.
