6
IM9000F02-E2
3. SETTING FOR COMMUNICATION
In order to make communication between the REX-F9000 and the host computer (or PLC), it is
necessary to set the device address, communication speed, communication data configuration, interval
time and protocol. Communication settings are made in parameter group 24 (PG24).
3.1 Preparation for setting communication parameters
The setting of parameter group 24 (PG24) can be changed only in control stop mode. Before the
SETUP mode is selected, it is necessary to set the mode selection of "Control RUN/STOP" to
"STOP."
c
Press the MODE key to set the instrument to the mode transfer.
d
Press the MODE key to display "Control RUN/STOP."
e
Press the DOWN key to control is changed from execution
(RUN) to STOP.
:
Bright lighting
: Dim lighting
SET
MODE
MONI
CH
CH
PV
SV
SET
MODE
MONI
CH
CH
PV
SV
SET
MODE
MONI
CH
CH
PV
SV
