RKC INSTRUMENT REX-F9000, Communication Instruction Manual, Page: 41 / 60

4. RKC STANDARD COMMUNICATION
IM9000F02-E2 35
(Attributes RO: Read only, R/W: Read/Write)
Name
Iden-
tifier
Data range Attribute
Factory set
value
Alarm 2 hold action
selection
WB
See * 9 R/W
See * 7
0
Set data lock level
selection
LK See *
10
R/W 0
Mode lock level selection LM See *
11
R/W 0
*
1
: This is an identifier which enables communication when there is an alarm 1.
*
2 :
This is an identifier which enables communication when there is an alarm 2.
*
3
: Any number other than "0" indicates errors (RAM write error, etc.) detected by the REX-F9000 self-
diagnosis function. If two or more errors occur simultaneously, the sum total of all error Nos. is sent.
Contact your nearest RKC sales agent or RKC sales office.
Error code Details
- MCU abnormality
- MCU power supply voltage abnormality
-
Software abnormality
16 Input circuit abnormality
8
EEPROM error
4
Adjusted data destruction
2 Sensor break
1
Other abnormality
*
4
: This is an identifier which enables communication when there is an analog output.
*
5 :
Do not set "3."
*
6
: Analog scale range : The analog output scale differs depending on the analog output specification.
Analog output specification Analog output scale range
0 : When measured value (PV) is selected. 0.000 to 50.000
q
C
1 : When deviation (DEV) is selected.
-19.999 to +19.999
q
C
2 : When set value (SV) is selected. 0.000 to 50.000
q
C
3 : When manipulated output (MV) is selected. -5.0 to +105.0%
*
7
: Data can be written only in STOP mode.
*
8
: Alarm type
Set value Type
0 No alarm
1 Set value high alarm
2 Set value low alarm
3 Process high alarm
4 Process low alarm
5 Deviation high alarm
6 Deviation low alarm
7 Deviation high/low alarm (Absolute value setting)
8 Band alarm (Absolute value setting)
Continued on the next page.