RKC INSTRUMENT CB100 Series, Connection Manual

Page: 270 / 292

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
270
6.19 LE100 Series
This address can be specified as system data area.
<Communication identifier list>
Device Bit Address Word Address
32
bits
Notes
Communication identifier 0000.0-0072.F 0000-0072
*1 *2
*1 There are cases for which writing is not available depending on the device address. Check the
identifying attributes of the external device’s manual before use.
*2 When bit is written, the indicator reads the corresponding word address of external device, assign
a bit to the read word address, and return to the external device. There are cases when correct data
cannot be written if the word address is written using a ladder program, while the indicator reads
data of the external device and sends it back.
Address Identifier Description
00 M1 Measured value (PV)
01 AA Output 1 status
02 AB Output 2 status
03 AC Output 3 status
04 AD Output 4 status
05 AE Output 5 status
06 AF Output 6 status
07 AG Output 7 status
08 AH Output 8 status
09 B1 Burnout
0A ER Error code
0B ID ID data
0C ID ID data
0D ID ID data
0E MS Specific gravity monitor
0F ML Scale low monitor
10 MH Scale high monitor
11 HP Peak hold monitor
12 HQ Bottom hold monitor
13 MW Number of wafer processing times monitor
14 MZ Amount of emptiness correction monitor
15 A1 Output 1 set value
16 A2 Output 2 set value
17 A3 Output 3 set value
18 A4 Output 4 set value
19 A5 Output 5 set value
1A A6 Output 6 set value
1B A7 Output 7 set value
1C A8 Output 8 set value
1D A9 Actual liquid output setting
1E AZ Emptiness adjustment
1F WT Number of wafer processing times
20 CW Initializing the number of wafer processing times
21 HR Hold reset
22 IR Interlock release