1. Installation declaration
27
D
e
u
ts
ch
E
n
g
li
sh
Fr
a
n
ça
is
E
sp
a
ñ
o
l
It
a
li
a
n
o
1.1 Installation declaration
As set out in Machine Directive 2006/42/EC, Appx. II, 1.B for incomplete machines
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
confirms that the named product
Mat:
see maker's plate on the front page of these installation instructions
AB:
see maker's plate on the front page of these installation instructions
Pos:
see maker's plate on the front page of these installation instructions
SN:
see maker's plate on the front page of these installation instructions
ID no.:
see maker's plate on the front page of these installation instructions
Bj:
see maker's plate on the front page of these installation instructions
complies with the requirements for an incomplete machine according to EC machine directive
2006/42/EC.
The following basic requirements of Machine Directive 2006/42/EC as set forth in Appendix 1 are
applied and met:
1.1.5.; 1.1.7.; 1.3.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.9.; 1.5.8.; 3.2.1.; 3.4.4.; 4.1.2.1.; 4.1.2.3.;
4.1.2.4.; 4.1.2.5.; 4.1.2.6.a), 4.1.2.6.b); 4.1.2.6.c); 4.1.2.6.d); 4.1.2.6.e); 4.1.3.; 4.2.1.; 4.2.1.4.;
4.2.2.; 4.2.3.; 4.3.1.; 4.3.2.; 4.3.3.; 4.4.1.; 4.4.2.; 6.1.1.; 6.3.3.; 6.4.1.; 6.4.3.
The following harmonising standards were applied:
DIN EN ISO 12100 – 1
Machine safety - Basic definitions, general design guidelines Part 1: Basic
terminology, system engineering
DIN EN ISO 12100 – 2
Machine safety - Basic definitions, general design guidelines Part 2: Tech-
nical guidelines and specifications
DIN EN ISO 14121 – 1
Machine safety – Risk assessment – Part 1 Guidelines
RK Rose+Krieger undertakes to deliver the technical documents for an incomplete machine as set
out in Appendix VII B to Directive 2006/42/EC on request from the national agencies with a justi-
fied request in electronic form.
Under the supervision of the document manager
Minden / 29.12.2009
Technical Manager
Place / Date
Signature
Signatory information
Commissioning is forbidden until the machine in which this incomplete machine is incorporated
complies with the provisions of EC Directive 2006/42/EC.
Before bringing into service, this must comply with EC directives, including documentation.
Minden / 29.12.2009
Managing Director
Place / Date
Signature
Signatory information